Product ID:JMP MOTOR OIL STABILIZER
MSDS Date:09/01/1991
FSC:9150
NIIN:00N052903
MSDS Number: BVPDX

Emergency Phone: 800-262-4183; 800-421-2185

Info Phone: 310-532-8602

Preparer: J.M.P./OJ.

Cage: JMPRR

Telephone: 800-262-4183; 800-421-2185

Cage: JMPRR

NONHAZARDOUS INGREDIENTS; (LUBE OIL ADDITIVE)

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE EFFECTS: NONE KNOWN. INGESTION -
MINIMAL TOXICITY. CHRONIC EFFECTS: WILL OCCUR.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:DUE TO THE OIL-BASE AND COMPONENTS
OF THIS MIXTURE, IF MISTING OCCURS, COMPANY RECOMMENDS CONTROL OF
EXPOSURES TO 5 MG/M3 OR LESS.

First Aid:EYE: FLUSH WITH WATER 15 MINUTES. IF IRRITATION PERSISTS, GET
MED ATTN. SKIN: FOR HOT PRODUCT, IRRIGATE W/COLD WATER. TREAT AS A
BURN. INHAL: REMOVE VICTIM TO FRESH AIR. RESUCITATE, GET MD.
INGEST: CA LL MD IMMEDIATELY .

Flash Point Method:PMCC
Flash Point:350F,177C
Extinguishing Media:WATER SPRAY OR FOAM.
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . RESPIRATORY AND EYE PROTECTION REQUIRED FOR FIRE
FIGHTING PERSONNEL.
Unusual Fire/Explosion Hazard:USE WATER SPRAY TO FIRE EXPOSED SURFACES
AND TO PROTECT PERSONNEL. ISOLATE "FUEL" SUPPLY FROM FIRE, USE
FOAM, DRY CHEMICAL OR WATER.

Spill Release Procedures:SHUT OFF SOURCE. FOR LARGE SPILLS, IMPLEMENT
CLEAN-UP PROCEDURES, IF IN PUBLIC AREA, AND ADVISE AUTHORITIES.
KEEP OFF OF WATERWAYS & SOIL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NON REGULATED. OBSERVE NORMAL
PRACTICES FOR INDUSTRIAL PETROLEUM OILS.
Other Precautions:IT IS IMPERATIVE THAT GOOD INDUSTRIAL HANDLING BE
OBSERVED.

Respiratory Protection:NOT APPLICABLE - NO VAPOR. USE NIOSH/MSHA
APPROVED RESPIRATOR FOR EXPOSURE OF CONCERN .
Ventilation:ONLY WHENEVER HEATED ABOVE AMBIENT TEMPERATURES OR
AGITATED, USE MECHANICAL VENTILATION DEVICE.
Protective Gloves:IF HOT USE INSULATED GLOVES.
Eye Protection:ANSI APPROVED CHEM SAFETY GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AND BODY WITH SOAP AND WATER AS FOR
NORMAL HYGIENIC PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:500F,260C
Spec Gravity:0.86 (H*2O=1)
Appearance and Odor:HONEY YELLOW AND PETROLEUM OIL ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:STRONG OXIDIZING AGENTS.

Waste Disposal Methods:CONFORM TO LOCAL, STATE, AND FEDERAL AUTHORITY
DISPOSAL REGULATIONS OF OIL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.